I have Ziti installed at a customer site. I have the controller/edge router in an Oracle cloud instance. All was working well, until I got a message about them turning it off due to not pulling enough load on the instance. I then found an article and used SysBench to artificially stress the CPU d…

Hello. I think there may be a few things going on here. First, a connected IPC client closes. I might assume the closing client is the UI, but apparently there were two active clients when this close happened (since the count: 1 is after the close). Do you know what might be using the IPC socket on…

Thanks for the reply. [image] scareything: Does “ziticontroller.thesmithcave.nz” resolve successfully for you when these connection failures are happening? I haven't noticed any connection failures when going to use it. Just noticed them in the log and wonder what could be causing these. …

Did your firewall changes make any difference? So far your logs have drawn my attention to some problems in the IPC command processing code that should definitely be addressed, but nothing that easily explains why clients would fail to reconnect when the controller comes back online. I’ll keep look…

Hey So, we are having a three day weekend, so only one working day since the last post. However, the client which had the problem, and the controller (cloud) are now not complaining, ie nothing in the logs around TLS issues/connection issues since I made modifications on the Firewall. There seems…

[image] scareything: Which version of ZDEW or ziti-edge-tunnel is this? ZDEW 2.1.15.0 Service: 2.1.16 [image] scareything: Out of curiosity, do you know what IPC clients are connecting to the ZDEW process that you’ve shown logs from here? You mean who is using that service? I have t…

Just wondering where you landed on this. Did you manage to find an issue with the IPC command? Wondering if there is likely to be a Windows client update at some point which may address the issue, if you did indead find a problem. I have the same client go down, but nothing really stuck out in th…

Hello, Thanks for bringing this back into the foreground for me. I did look, and I didn't find any real issues with the IPC command logic. Since you've posted this there has been a fair amount of attention to re-connect issues with the ziti SDK that the ZDEW uses. The main issue you describe here …

Ziti client not reconnecting

Tunneler Apps Ziti Desktop Edge for Windows

Topic		Replies	Views
Crypto Failure in ziti-edge-tunnel Support	9	250	September 15, 2023
Edge client unable to connect from WAN after reboot	8	263	September 19, 2023
Failure of Ziti-Edge-Tunnel Gateway Mode on Linux	20	480	March 18, 2024
SEGV crashing ziti-edge-tunnel von v0.22.15	1	120	February 15, 2024
Ziti Desktop Edge crashes on Win11 Startup/Sleep Ziti Desktop Edge for Windows	2	116	June 26, 2024

Ziti client not reconnecting

Related topics